About this guide

 

 

Who should read this guide

This user guide is for people with the following job roles:

 

Job role	Responsibilities
Installer	Unpacks, installs, and tests the device before it is used.
Integrator	Configures hardware and writes software.
Lab manager, administrator, or technician	• Manages the automation system that contains the device • Develops the applications that are run on the system • Develops training materials and standard operating procedures for operators
Operator	Performs the daily production work on the device and solves routine problems.

 

 

Installers, integrators, lab managers, and administrators are users who must have technical expertise. In addition, lab managers and administrators are individuals or groups responsible for the use and maintenance of the BenchBot Robot and for ensuring that operators are adequately trained.

What this guide covers

This guide describes the Agilent BenchBot Robot and the operation of the hardware components using Agilent BenchBot Robot Diagnostics.

This guide does not provide instructions for the following:

•	Installation instructions

•	VWorks software or third-party automation software

•	Agilent Technologies devices, such as the Bravo Automated Liquid Handling Platform, PlateLoc Thermal Microplate Sealer, Microplate Seal Piercer, Microplate Labeler, Vertical Pipetting Station, Microplate Centrifuge, and Labware Stacker.

•	Third-party devices

See Related guides.

Software version

This guide documents the following:

•	BenchBot Diagnostics version 1.0.x or later

•	BenchBot firmware version 1.0.x or later

Related guides

This user guide should be used in conjunction with the following documents:

•	BenchBot Robot Unpacking Guide. Explains how to unpack and pack the robot.

•	BenchBot Robot Safety and Installation Guide. Provides the Agilent BenchBot Robot specifications, site requirements, and installation instructions. The guide also describes the potential safety hazards and how to avoid them.

•	VWorks Automation Control Setup Guide. Explains how to install the VWorks software, define labware, track labware, and manage users.

•	VWorks Automation Control User Guide. Explains how to add devices, create protocols, set task parameters, and run protocols.

•	VWorks Software Quick Start. Provides an overview of how to use the VWorks Automation Control software.

•	Automation Solutions device user guides. Explains how to set up and use the Automation Solutions devices.

•	Third-party device user documents. Explains how to set up and use the third-party devices.

Related information

 

For information about...	See...
Accessing related user guides	Accessing Automation Solutions user guides
Reporting problems	Reporting problems