Setup workflow

About this topic

This topic presents the workflow for setting up the BenchBot Robot for operation.

Workflow

The following table presents the steps for setting up the BenchBot Robot. After setting up the BenchBot Robot for the first time, you will not likely change any of the settings in the procedure.

 

Step	For this task...	See...
1	Turn on the robot.	Turning on and turning off the robot
2	Create a device file.	Creating a device file
3	Add the BenchBot Robot in the device file.	Adding and deleting BenchBot Robots in the device file.
4	Create a profile for the BenchBot Robot.	Creating BenchBot Robot profiles
5	Set up robot communication.	Setting up robot communication
6	Select a teachpoint file.	Selecting a teachpoint file
7	Save the profile.	Saving the profile
8	Initialize the profile.	Initializing the profile
9	Back up the firmware.	Backing up the robot firmware

If you want to edit, delete, rename, or create a new profile using an existing profile, see Editing and managing profiles.

Related information

 

For information about...	See...
Installing the robot	BenchBot Robot Safety and Installation Guide
Teachpoint files	Teachpoint files
Setting teachpoints	Setting teachpoints