Labware MiniHub User Guide : Introduction : Quick start

Quick start
Overall setup workflow
The following table presents the basic steps for setting up the Labware MiniHub for operation.
 
Prepare the lab for the Labware MiniHub installation.
Install the Labware MiniHub.
Turn on the Labware MiniHub.
Install the VWorks software, or integrate the MiniHub ActiveX control.
VWorks software only. Start the VWorks software and log in.
VWorks software only. Create a new device file (if not already done).
VWorks software only. Add the Labware MiniHub in the device file.
Create a Labware MiniHub profile and set the profile parameters.
Set the MiniHub home position.
10 
11 
VWorks software only. Set the Labware MiniHub device properties.
12 
VWorks software only. Verify that the labware you plan to use is defined in the Labware Editor for the robot that you are using.
BenchCel Configuration only. Ensure that the Stack holding method is set to Hold with stacker grippers to ensure precision performance.
13 
VWorks software only. Ensure that MySQL 5.7 is installed on the computer, and that the database connection is enabled in the VWorks options.
14 
Related information
 
Labware MiniHub description