Safety and regulatory compliance

Compliance standards

 

 

The Microplate Labeler complies with the applicable EU Directives and bears the CE mark. See the Declaration of Conformity or Declaration of Incorporation, as applicable, for details. The Microplate Labeler is designed to comply with the regulations and standards listed in the following table.

 

Regulatory Compliance	Standard
EMC
European Union	EMC Directive 2014/30/EU
	IEC 61326-1:2012 / EN 61326-1:2013
Canada	ICES/NMB-001:2006
Australia/New Zealand	AS/NZS CISPR 11:2011
RoHS
European Union	RoHS Directive2011/65/EU
Safety
European Union	Machinery Directive 2006/42/EC
	Low Voltage Directive 2014/35/EU
	IEC 61010-1:2010/EN61010-1:2010 IEC 61010-2-081:2015/EN 61010-2-081:2015
Canada	CAN/CSA-C22.2 No. 61010-1-12 CAN/CSA-C22.2 No. 61010-2-081-15
USA	ANSI/UL 61010-1-2012 ANSI/UL 61010-2-081:2015

Electromagnetic compatibility

If the Microplate Labeler causes interference with radio or television reception, which can be determined by turning the device off and on, try one or more of the following measures:

•	Relocate the radio or television antenna.

•	Move the device away from the radio or television.

•	Plug the device into a different electrical outlet, so that the device and the radio or television are on separate electrical circuits.

•	Make sure that all peripheral devices are also certified.

•	Make sure that appropriate cables are used to connect the device to peripheral equipment.

•	Consult your equipment dealer, Agilent Technologies, or an experienced technician for assistance.

Changes or modifications not expressly approved by Agilent Technologies could void the user's authority to operate the equipment.

 

 

South Korea EMC Declaration

The following EMC declaration applies to:

1	All models that were registered on or after 7 December 2016, but

2	Not to models included in a product family or series that was registered before 7 December 2016 (even if the model was added to the product family or series on or after 7 December 2016).

EMC declaration for South Korea

This equipment has been evaluated for its suitability for use in a commercial environment. When used in a domestic environment, there is a risk of radio interference.

 

 

 

Sound emission declaration

Sound pressure: Lp < 70 dB according to EN ISO 779:2010.

Schalldruckpegel: Lp < 70 dB nach EN ISO 779:2010.

Related information

 

For information about...	See...
General precautions, intended use statement, and safety labels	Automation Solutions Products General Safety Guide
Potential hazards	Potential safety hazards
Stopping in an emergency	Stopping in an emergency