Preparing to run a protocol

About this topic

This topic describes how to prepare the Vertical Pipetting Station for a run.

Procedure

To prepare the Vertical Pipetting Station for a a run:

1	Ensure the correct pipette head is installed and the Vertical Pipetting Station is turned on.

2	Initialize the profile for the hardware configuration. See Initializing the Vertical Pipetting Station.

3	If required, place microplates, tipboxes, and other labware in their correct locations on the Vertical Pipetting Station shelves.

4	If applicable, ensure the reservoirs are filled, the waste bottles are empty, and all tubing is correctly connected.

5	Ensure that the protocol has been checked for errors using the compile feature. If possible, run the protocol in simulation mode to identify possible conflicts or errors.

Related topics

 

For more information about…	See…
Installing and setting up Vertical Pipetting Station	• Installing Vertical Pipetting Station • Workflow for setting up the Vertical Pipetting Station
Installing, setting up, and running the automation control software	VWorks Automation Control User Guide
Initializing the Vertical Pipetting Station	Initializing the Vertical Pipetting Station
Changing the pipette head	Changing the pipette head